Published: December 2026 | By Youdianbang Engineering Team | 6 min read
Argentina is the Latin American market where a Mode 2 charger either arrives with the right plug or does not sell. Schuko, BS 1363 and GB/T units all fail at the wall, and the question every distributor and exporter ends up asking — typed into search exactly like this: "argentina iram 2073 plug ev charger 10a or 20a" — is a stocking decision, not a trivia answer. Get it wrong one way and the entry SKU is missing; get it wrong the other and slow-moving stock eats the margin.
The short answer: stock both, in that order — 10 A for the entry and replacement SKU, 20 A as the volume SKU — because the two variants are deliberately incompatible and serve different customers. Here is the engineering behind that answer, and the certification path that gets the product onto the shelf.
What Plug Standard Does Argentina Use for EV Charging? The 10 A vs 20 A Split
What plug standard does argentina use for ev charging at the wall? IRAM 2073 — the Argentine plug and socket-outlet standard, a Type-I family with two flat parallel pins and an earthing blade, rated 250 V at 50 Hz. For Mode 2 exports the family splits in two, and the split is physical:
• The 10 A variant uses narrower flat pins. At Argentina's 220 V it delivers roughly 2.2 kW — about 100 km of overnight range from an eight-hour session. It is the plug that matches the wiring of older and everyday domestic installations, and it is what a customer with an existing wall socket can use on day one.
• The 20 A variant uses visibly wider pins, which make the two variants mutually incompatible by design — a 20 A plug will not enter a 10 A outlet. At 220 V it delivers roughly 4.4 kW, doubling the overnight session, and it assumes the socket and circuit were installed for it.
That incompatibility is the whole stocking logic. A 10 A-only catalogue locks out the faster segment; a 20 A-only catalogue locks out every customer whose wall is a 10 A wall. The current setting on the Mode 2 unit should follow the plug it ships with: 8–10 A settings behind a 10 A plug, 16–20 A settings behind a 20 A plug — and since the 2024 edition of IEC 62752, the plug itself should be the most monitored part of the cable, whatever its rating (the 70 °C / 10 s rule decoded here). That is the full engineering answer to "argentina iram 2073 plug ev charger 10a or 20a": stock both, and let the plug — not a standard clause — set the current. The same standard-versus-guidance discipline applies here as anywhere else: IEC 62752 caps nothing at 10 A (the misquote corrected here) — the plug variant is what decides the current.
✅ Bottom line: IRAM 2073 splits into an incompatible 10 A (≈2.2 kW) and 20 A (≈4.4 kW) pair; stock both — 10 A for day-one walls, 20 A for the volume segment — and let the plug, not a fictional standard clause, set the current.

How to Certify an EV Charger for Argentina IRAM Mark — The Exporter's Path
How to certify an ev charger for argentina iram mark requirements is a two-track question: the plug's conformity to IRAM 2073, and the finished charger's market-entry conformity. Argentina runs a national conformity system for household electrical products — the S-mark route — under which certified products are identified with the "S" and a certification body number. The practical path for an exporter runs like this:
• Start from CB scheme reports. An IC-CPD certified under IEC 62752 with a valid CB report shortens local testing substantially — the Argentine certification body works from the international report and tests to national deviations, rather than from zero.
• Appoint the certification early and locally. The application runs through an accredited Argentine organism (IRAM's own certification arm, INTI, or internationally affiliated bodies operating there), and the importer typically acts as the responsible party of record — agree on who holds the file before the PO is signed.
• Match the sample to the SKU exactly. As with every market we ship to, the plug variant, current rating and cable length on the sample must be the ones on the invoice — a 20 A certificate does not cover a 10 A product line, and Argentina's certifiers check that like everyone else's.
The factory side shortens all three steps. Youdianbang moulds IRAM 2073 plugs on the same line as its VDE and GB plugs — see the plug range here — so the 10 A and 20 A variants come from one tooling family with one material system, and both can be ordered with plug temperature sensing per IEC 62752:2024. LatAm is a market we exhibit in, not just export to — see our São Paulo EV charging exhibition report for the context behind this guide.
✅ Bottom line: The path is CB report → accredited Argentine organism → importer of record, with the sample matched SKU-exactly; a factory that moulds IRAM 2073 plugs in both current classes compresses the whole route.
Frequently Asked Questions
Q: The search reads "argentina iram 2073 plug ev charger 10a or 20a" — which SKU should a distributor stock first?
A: Stock the 10 A first as the entry and replacement SKU — it matches existing everyday walls at roughly 2.2 kW — then add the 20 A as the volume SKU for customers installing dedicated circuits at roughly 4.4 kW. The two are physically incompatible, so neither replaces the other.
Q: What plug standard does Argentina use for EV charging compared with its neighbours?
A: IRAM 2073 — a Type-I configuration with two flat parallel pins and an earthing blade, distinct from Brazil's NBR plugs and Chile's mixed landscape. Argentina's nominal residential supply is 220 V / 50 Hz, which is also why the same 10 A plug class delivers double the power of a 110 V market.
Q: How to certify an EV charger for Argentina IRAM mark requirements without repeating full testing?
A: Lead with a CB report for the IC-CPD under IEC 62752, work with an accredited Argentine certification body, and appoint the importer as responsible party early. The local body tests national deviations on top of the international report — and the sample must match the shipping SKU in plug variant, current rating and cable length.
Next Step
Bring the whole 10 A / 20 A question to a factory that already moulds the plug. Ningbo Youdianbang New Energy Technology Co., Ltd. produces IRAM 2073 plugs — including temperature-sensing variants — in the same Ningbo factory that assembles the IC-CPD and cord, ships sample kits in both current classes with the CB documentation chain, and quotes wholesale, OEM and custom volumes with the current rating frozen per plug variant. Start from the Mode 2 portable EV charger range or send your stocking plan for both variants.
www.ydbcharger.com
Ningbo Youdianbang New Energy Technology Co., Ltd.









+ There are no comments
Add yours