Truck Bulb Size Chart: Headlight, Fog, Marker & Interior by Application

Estimated read time 6 min read

Published: November 2026 | By Gentle King Engineering Team

82dbc6a16539553a2ee9e85692edfb1f

A useful habit for any counter: quote the position and the base together, never the model letter alone. A driver who says "my marker is out" needs a wedge or BA15S lamp, not the H4 they saw on the box last time; a fleet buyer who says "H7" still has to confirm 24V and PX26d before a carton ships. Sorting stock by these four positions — rather than by model letter in one mixed bin — is the difference between a two-minute sale and a wrong-part return.

A semi truck is not one bulb — it is four bulb families running at once, each with its own model, base and wattage. The what bulbs do semi trucks use at night question usually arrives at the counter from someone holding one blown lamp and guessing. The reliable answer starts with position: front, fog, rear and cab each have a short list, and matching the base ends the guesswork.

Gentle King, the trade name of Nantong Gentle King Optoelectronics Science And Technology Co., Ltd., builds all four families on dedicated 24V/HD lines under an IATF 16949 system, with E4 and DOT approvals. The chart below follows the vehicle from nose to cab so a parts counter or service bay can work outward from the position they are standing at.

1. Position-by-Position: Which Bulb Goes Where?

Read the truck front to back: H4/H7 up front, H11 or H3 in the fog lamps, R5W and wedge types at the rear, C5W or 10W inside the cab. That is the entire what bulbs do semi trucks use at night map in one line — the detail below is about which base you are actually holding.

• Headlight — H4 75/70W (P43t) and H7 70W (PX26d). H4 is the volume standard on heavy trucks, a twin-filament lamp handling high and low beam from one P43t flange. H7 is the single-beam workhorse on European tractor heads. For a counter checking the h7 24v 70w px26d replacement bulb cross reference, the PX26d base — two offset bayonet pins on a metal ring — is the deciding feature: see the Gentle King H7 70W 24V PX26d bulb. The H4 reference part is the H4 24V 75/70W commercial vehicle lamp.

• Fog and low work lamps — H11 70W (PGJ19-2) and H3 70W (PK22s). These sit low, throw a wide flat beam, and take the most vibration and water. H11 uses a plastic push-lock connector with two spade terminals; H3 is the small bulb with a single PK22s base and a long leading wire. Check the H11 70W 24V fog bulb or the H3 70W 24V fog lamp when the fitting is low-mounted rather than in the main housing.

• Rear markers and signals — R5W (BA15S) and W5W wedge. Tail, side-marker and indicator positions use small bayonet and wedge lamps, not headlight capsules. The R5W BA15S 24V signal bulb covers the bayonet position; wedge bases such as the CQ161 and CQ74 cover the small marker and panel positions. These are high-volume, low-cost SKUs — the ones a trailer or coach customer comes back for every season.

• Cab interior — C5W festoon (SV8.5-8) and 10W dome bulbs. Dome and panel lights in sleepers and day cabs are festoon or small wedge types. The C5W SV8.5-8 24V festoon and the 10W interior festoon cover the two lengths most cabs use.

✅ Bottom line: identify the position first, then the base — the model letter follows automatically and the wrong-part return disappears.

2. The Two Cross-References a Counter Needs Most

Bus and coach fleets on US-spec platforms ask about H13/9008; European tractor fleets ask about H7 PX26d — those two questions cover most "will it fit" calls.

The h13 9008 24v bulb for trucks and buses explained case comes up because one lamp carries two model numbers. H13 and 9008 are the same twin-filament, three-tab base used on a run of US-market pickups, vans and shuttle buses; the number on the old box is whichever catalog the buyer last used. Stock it under both labels and the counter stops losing the sale to a naming mismatch. See the Gentle King H13/9008 halogen headlight bulb for the reference part.

The h7 24v 70w px26d replacement bulb cross reference is the opposite problem: one model letter, several base variants across markets. H7 24V in commercial service is the PX26d metal-ring base; a 12V H7 looks identical in the glass but carries a different voltage marking, which is the mistake T02 covers in detail. Quote the 24V PX26d part, confirm the wattage stamp on the old lamp, and the fit is settled before the customer leaves the counter.

Distributors can turn both cross-references into a margin-friendly shelf: put an H13/9008 bin and an H7 PX26d bin beside the H4 volume line, label each with the base diagram, and let the Gentle King private label program print the alternate numbers on the carton. That is how an OEM-supplying factory — with Advance Auto Parts, NAPA and Chrysler OES programs behind it — removes the two most common wrong-part causes at once.

✅ Bottom line: H13 and 9008 are one lamp with two names; H7 fits only when the PX26d base and 24V stamp both match.

FAQ

Q: What bulbs do semi trucks use at night?

A: H4 75/70W or H7 70W in the headlamps, H11 or H3 70W in fog lamps, R5W and wedge lamps at the rear, and festoon or C5W bulbs in the cab — the what bulbs do semi trucks use at night answer is a four-position list, not a single model number.

Q: Are H13 and 9008 the same bulb?

A: Yes — the h13 9008 24v bulb for trucks and buses explained simply means the same twin-filament three-tab lamp listed under two catalog numbers. Stock and label both so buyers find it whichever number they quote.

Q: Can I fit a 12V H7 where a 24V H7 came out?

A: No — glass and PX26d base look the same, but the voltage stamp differs. The h7 24v 70w px26d replacement bulb cross reference only resolves to a 24V part when the base and the 24V marking both match; a 12V lamp in that socket will fail quickly.

Need a complete 24V assortment for your counter or fleet store? Gentle King supplies headlight, fog, marker and interior bulbs under private label with E4 and DOT approvals, backed by six North American warehouses and seven-day stock delivery. Talk to our commercial vehicle team about a position-by-position range built for your market.

www.jiklight.com
Nantong Gentle King Optoelectronics Science And Technology Co., Ltd.

You May Also Like

More From Author

+ There are no comments

Add yours